86-18677911944      dengxiao0303@hotmail.com
Infrared Gas Burner Ceramic Honeycomb Plate
You are here: Home » Products » Infrared Burning Plates » Infrared Gas Burner Ceramic Honeycomb Plate

loading

Infrared Gas Burner Ceramic Honeycomb Plate

Quantity:
sharethis sharing button
  • 100, 000pieces/Month

  • Wooden Box and Pallet or Packaged as Your Request

  • L/C, T/T, Western Union

  • ICP

  • Ceramic

  • Heater

  • Plate Heat Exchanger

  • DXY

  • China

  • 133*93*13mm, 250*145*15mm, etc

  • Round, Square, etc

  • Round, Cinquefoil, Diamond, etc

  • 1.4mm, 1.6mm, 1.8mm, etc

  • Metallurgical Operation

  • Regenerative Heat Exchanger

Product Description

Honeycomb ceramic as the infrared combustion ceramic plate is made by the high purity cordierite material and used in the gas-fired stove where it saves 20%-50% energy cost and reduces more than 90% of the harmful gas emission. This product has good thermal shock resistance (no cracks on the product if the honeycomb ceramic with 1000 is in the water with 20 for 3 times), high mechanical strength (crushing strength is 20MPa on the top and 5MPa on the side), good endurance for high temperature, high resistance for erosion.

The gas combustion is occurred inside the holes of the Infrared Ceramic Plate, and the heat energy is radiated high-efficiently in the means of ultra-red rays, avoiding energy loss through visible light. For the advantages of high combustion efficiency, well distributed heating and low exhaust gas emission, Ceramic Combustion Plate is proved to be an environmentally friendly heating technology, and it is the idea technology to replace the traditional gas combustion technology.

If coated with a black catalyst, the honeycomb ceramic can transfer the heat by infrared radiation style and this combustion style has more outstanding advantages comparing to the normal gas-fired stove combustion as below:
*20%-50% energy saving
*Mixes oxygen completely with the gas, burning efficiently with no flame and little noise
*Operating safety without being influenced by wind when operating outdoor
*Decreasing the CO and NOx poisonous gas disposal and remove harmful

Advantages:
*Save 20-50% energy consumption
*Burn without flame, low noise
*Reduce the formulation of such harmful gas as CO, NOx, etc by a large margin (more than 70%)
*Strong bearing of wind, using safely

Physical Merits:
*Good thermal shock resistance ( no cracks after 3 times thermal shock from 800 ° C to cold water)
*High mechanical strength ( crushing strength is 20MPa on the top and 5MPa on the side)
*Good endurance for high temperature
*High resistance for erosion

Application: Widely used in various burners, ovens, fryers, heaters and barbecue set which burn gas

Hole Round hole Square hole
Material cordierite cordierite
Volume density 0.45-0.65g/L 0.45-0.65g/L
Hole density 300-320 hole/in 2 260 hole/in 2 ,280 hole/in 2 ,320 hole/in 2 ,520 hole/in 2
Wall thickness / 0.18-0.23mm,0.28-0.33mm, 0.35-0.40mm
Length of side of hole / 1.06mm,1.13mm,1.2mm
Hole diameter 1.12mm,1.25mm,1.42mm /
Distance between Two Holes Axis 1.8mm,2.2mm,2.7mm 1.33-1.59mm
Open hole ratio 33.5-46.5% 63.5-73.5%
Water-absorbing rate(%) > 46% > 40%
thermal expansion coefficient 2.0-2.3 × 10 -6 2.0-2.5 × 10 -6
Heat stability 850 ° C--25 ° C, do not crack in three times 1200 ° C--25 ° C, do not crack in the condition of reduplicate cooling
Highest Working Temperature( ° C) > 1375 ° C > 1375 ° C
Compression Strength
(Lengthways)
>13.0Mpa >10.0Mpa
Compression Strength
(Horizontal)
>6.0Mpa >3.0Mpa

Rotundity shape Ellipse shape
Specificationmm Number of channels (holes /square inch) Specification (mm) Number of channels (holes /square inch)
Φ 83 × 85 400 T146.8 × 77 × 86.4 400
Φ 144 × 152.4 400 T120.6 × 80 × 152.4 400
Φ 100 × 100 400 T169.7 × 80.7 × 76.2 400
Φ 130 × 130 400 T144.8 × 81.3 × 152.4 400
Φ 118 × 150 400 T144.8 × 81 × 76.2 400
Φ 103 × 100 400 T169.7 × 80.7 × 101.6 400
Φ 150 × 75 400 T144.8 × 81.3 × 100 300
Φ 83 × 125 400 T127 × 63.5 × 107 300
Φ 150 × 150 300 T144.8 × 81.3 × 70 300
Φ 120 × 100 300 T144.8 × 81.3 × 150 300
Φ 101.6 × 100 300 Race track shape
Φ 94 × 100 300 P120.65 × 80.01 × 76.2 400
Φ 85 × 70 300 P120.65 × 80.01 × 76.2 200
Φ 93 × 76 200 P144 × 68 × 150 400
Φ 118 × 76 200 P125 × 80 × 100 400

Previous: 
Next: 

CONTACT US

More >>
  86-18677911944
 dengxiao0303@hotmail.com
 Room 23 Cec Building Chinese Electronic Beihai Industrial Park No. 368 Beihai Da Road Beihai City, Guangxi Province, Beihai, Guangxi, China 536000

ABOUT US

We hereby make our commitment to all of our clients: We provide the most effective and satisfying service here.  

QUICK LINKS

PRODUCTS CATEGORY

SUBSCRIBE

Sign up for our newsletter to receive the latest news.
Copyright  2020 Beihai Xiaoming International Import and Export Trading Co., Ltd. 
Sitemap   |   Support By Leadong